Live at Work Truck Week 2025:
Custom Enclosed PM Lube Truck
Custom Enclosed PM Lube Truck
About This Truck:
Welcome to the epitome of customization-led efficiency! Tank capacities and layouts, storage cabinets and shelves, tool box options, reel bank configurations, and so much more make this truck the perfect workhorse for your teams on site.
NEW OIL:
- Four (4) 200-gallon, two (2) 150-gallon, & one (1) 100-gallon tanks
- 5:1 pumps
- Digital oil meters
- 50' x 1/2" reels
- Hose kits, ball valves, and inline product filters
WASTE OIL:
- 220-gallon used waste oil tank
- 1" hydraulic-operated pump
- 1" x 30' Alemite waste oil reel (rear bumper mounted)
- Y-strainers, coupler kits, hose kits, regulators, and 4-way valve
ANTIFREEZE:
- 50-gallon stainless steel tank
- 3/8" air-operated pump for dispensing
- 3/8" Alemite reel
- Regulator, water bibb, & hose kit
WASTE ANTIFREEZE:
- 50-gallon stainless steel tank
- 3/4" air-operated diaphragm pump
- 3/43" x 30' Alemite reel
- Y-strainers, coupler kits, hose kits, regulators, and 4-way valve
GREASE:
- 70:1 air-operated 120lb pump
- 50' x 3/8" reel
- Connection hose kit, CO7 combo, & control swivel
AIR:
- 32CFM hydraulic compressor (PTO driven)
- Air manifold kit
- Alemite 50' x 1/2" air reel
LIGHTING & ELECTRICAL:
- LED floodlights on rear body w/cab switch for dual-use as backup lights
- 4100 lumen flood lights on side body
- Rechargeable droplight in rear compartment
- 3200 Power Inverter (mounted on work bench)
- 115 VAC outlet (mounted in rear compartment; accessible from ground + two in drawer rear box)
- Back up camera with LCD screen
STORAGE:
- One 4-drawer Ctech Manufacturing toolbox and one 3-drawer Ctech Manufacturing toolbox mounted in rear bumper (color matched)
- Aluminum underbody storage boxes
- Interior shelf kit with dual side shelves and center angled shelf
- 36" workbench (mounted)
SPECIALTY OPTIONS:
- Used filter insert with suction (passenger side underbody mounted)
- Aluminum catch pan (20" x 25" x 14")
- 5lb fire extinguisher
- Two (2) 15-volt heaters for night heating (can plug in or outside truck)
- Espar diesel-fired heater with in-cab controls and ducting to prevent blocked air vents
- T-In Air System for land-supplied air on indoor sites
- Exterior underbody lighting for walking visibility
- Stair lighting for side-entry door
- "Angle containment" addition to tanks to aid in wash out
- Manual roof vent
- Dedicated area for buckets/additional supplies
- Ladder storage
- Tool charging station with 110V outlet mounted inside toolbox drawer
- Wheel chock storage on driver's side
